TWO–COMPONENT EPOXY SYSTEM RESISTANCE TO ACID   AND CHEMICAL - ind

    TWO–COMPONENT EPOXY SYSTEM RESISTANCE TO ACID   AND CHEMICAL 
    A– 1 ST PRIMER (G-5532)
    B– 2 ND PRIMER (G-5533)
    C– TOP COAT (D-5542)

    A– 1 ST PRIMER (G-5532)

    EPOXY PRIMER IS USING AS A PRIMERING COAT ON CONCRETE AND METAL SURFACES IT HAS A HIGH RESISTANCE TO WATER, WEATHER, CHEMICAL AND MECHANICALLY RESISTANT 

    - BASE: EPOXY RESIN 
    - COLOUR : RED BROWN 
    - THINNER : THINNER A / MPI 
    - SPREADING RATE : 7 M² /Ltr ON METAL SURFACE 4 M² /Ltr ON CONCRETE SURFACE 
    - FILM THICKNESS : 35 UM DRY PER APPLICATION 
    - PROCESSING :-
    A– MIXED PRIMER (G-5532) WITH HARDENER (H-5530) WITH MIXING RATIO (1 CAN 10 LITER PRIMER):(1CAN 4 LITER HARDENER) MIXED WELL FOR 20 min. 
    B– POT LIFE: APPROX 8 hr. AT ROOM Temp. 25°C
    - DRYING TIME: (3 – 4) hr. DRY TO TOUCH AT ROOM Temp. (25°C) MAY BY RECOATED AFTER ( 8 – 10 ) hr. 
    - APPLICATION METHOD :
    (1) THE SURFACE MUST BE CLEAN, DRY, FREE FROM DUST, USED SAND BLASTING TO RUBED THE SURFACE BEFOR COATED 
    (2) APPLIED BY BRUSH, ROLLER, SPRAY, NOT APPLY THE PRIMER AT TEMPERATURES BELOW 12°C AND AT A REL ATMOSPHERIC  HUMIDITY ABOVE 80 %                                                                                            
    - STORAGE: MAY BE STORED FOR 12 MONTHS AT ROOM Temp. 25°C 
       WHEN KEPT IN ORIGINALLY CLOSED CONTAINERS .

    B– INTERMEDIATE PRIMER (G-5533) 

    THIS PAINT IS A MECHANICALLY AND CHEMICAL RESISTANT, WEATHER AND WATER PROOF INTERMEDIATE COAT WHICH APPLIED ON METAL AND CONCRETE SURFACES 

    - BASE : EPOXY RESIN 
    - COLOUR : GREY 
    - THINNER: MPI THINNER / A.
    - SPREADING RATE : 7 M² /Ltr. ON METAL 4 M² /Ltr. ON CONCRETE 
    - FILM THICKNESS : 50 UM PER APPLICATION 
    - PROCESSING :
    (A) MIX PRIMER (G-5533) WITH HARDENER (H-5530) ON RATIO 
    (1 CAN 10LTR PRIMER):(1 CAN 4LTR HARDENER) MIXED WELL FOR 20 MIN                                                       
    (B) POT LIFE: APPROX 8 hr. AT ROOM temp. 25°C 
    - DRYING TIME : ( 3 – 4 ) hr. AT ROOM temp. MAY BE RECOATED AFTER ( 8 – 10  hr.) 
    - APPLICATION METHOD :
    (A) THE SURFACE MUST BE CLEAN, FREE FROM DUST,ETC.
    (B) APPLIED BY : BRUSH, ROLLER, SPRAY DO NOT APPLY PAINT AT temp. BE LOW 12°C AND AT AREL ATMOSPHERIC HUMIDITY OF ABOVE 80%
    - STORAGE : MAY BE STORED FOR 12 MONTHS AT ROOM temp. 25°C WHEN KEPT IN ORIGINALLY CLOSED CONTAINERS


    C– TOP COAT TWO COMPONENT EPOXY (D-5542)

    IT IS A MECHANICALLY RESISTANT WEATHER AND WATERPROOF AND CHEMICALLY RESISTANT COATING WHICH MEET THE MOST SEVERS REQUIREMENTS APPLIED ON METAL AND CONCRETE SURFACES 
     
    - BASE : EPOXY RESIN 
    - COLOUR : ALL UNI COLOURS 
    - THINNER: MPI THINNER / A .
    - SPREADING RATE: 7 M² /Ltr. ON METAL SURFACES 4 M² /Ltr. ON CONCRETE SURFACES 
    - FILM THICKNESS : 35 UM DRY PER APPLICATION 
    - PROCESSING :
    (1) MIXED PAINT (D-5542) WITH HARDENER (H-5530) ON  RATIO (1 CAN 10 LT PAINT) : (1 CAN 10 LT HARDENER) MIXED WELL FOR 20 min.
    (2) POT LIFE: APPROX 8 hr. 
    - DRYING TIME: (4 – 5) hr. AT ROOM TEMP 25°C MAY BE RECOATING AFTER ( 8 – 10 ) hr. DO NOT USED THE APPLY COAT BEFOR 8 DAYS AFTER COATING 
    -  APPLICATION METHOD : 
    (1) THE SURFACE MUST BE CLEAN, DRY 
    (2) APPLIED BY BRUSH, ROLLER, SPRAY DO NOT APPLY AT Temp. BELOW 12°C AND AT A RELATMOSPHERIC HUMIDITY OF ABOVE 80 % 
    - STORAGE: MAY BE STORED FOR 12 MONTHS AT ROOM Temp.25°C WHEN KEPT IN ORIGINALLY CLOSED CONTAINER 

     

     


    Copyright © 2015 MPIcoating.com. All Rights Reserved
    3:45