ACRYLIC SYSTEM - wood

    ACRYLIC SYSTEM :-
      A- POLYESTER PUTTY ( P-150-1040 ) 
      B- PRIMER SURFACER ( F-1023 ) 
      C-ACRYLIC TOP COAT ( D-1189 ) 


    A- POLYESTER PUTTY ( P-150-1040 )

    - IT IS USED TO COVER ALL PORES AND CRACKS ON THE WOOD SURFACES TO GIVE SMOOTH SURFACE WITH QUICK DRY .
    - APPLICATION METHOD :
    1)RUB THE SURFACE WITH SPECIAL SAND PAPER .
    2) A- MIXED PUTTY ( 100 GM ) WITH HARDENER ( 3 GM ) ,MIXED WELL FOR MINUTES .
       B- POT LIFE : APPROX  30 MIN / 20ْC .
    3) APPLY UNIFORM COAT WITH A KNIFE AND IN ONE MOTION .
    4) LEAVE TO DRY , THEN RUB WITH SPECIAL SAND PAPER .
    -DRYING TIME : ( 30-100 ) MIN /AT 25ْC
    -STORAGE : MAY BE STORED AT COLD AND DRY AREA AND IN ORIGINALLY CLOSED CONTAINER FOR 6 MONTHS .


    B- PRIMER SURFACER ( F-1023 )

    THIS PRIMER IS RAPIDLY DRYING WITH GOOD LEVELING PROPERTIES APPLIED AFTER ( P-150-1040 ) PUTTY USED SECOND COAT .

    - COLOUR : GREY
    - VISCOSITY : 16 SEC ( DIN 4 ) AT 25ْC 
    - THINNER : THINNER P- 851 / M P I 
    - DRYING TIME : 10 MIN TOUCH DRY 12 HR HARD DRY 
    - APPLICATION METHOD : SPRAY 
    - STORAGE : MAY BE STORED FOR 6 MONTHS AT ROOM TEMP WHEN IT KEPT ON ORIGINALLY CLOSED  CONTAINER 

    C- ACRYLIC TOP COAT ( D-1189 )

    AN ACRYLIC TOP COAT , WHICH IS RAPIDLY  DRYING WITH HIGH PERFORMANCE .
    - BASE : ACRYLIC RESIN
    - VISCOSITY : ( 14 – 16 ) SEC AT 25°C .
    - THINNER : THINNER P-851 / M P I .
    - DRYING TIME : 10 MIN TOUCH DRY.12 HR HARD DRY .   
    - FLASH POINT : 24°C .
    - STORAGE : MAY BE STORED FOR 6 MONTHS AT ROOM TEMP 25°C WHEN IT KEPT ON ORIGINALLY CLOSED CONTAINER . 

     

     


    Copyright © 2015 MPIcoating.com. All Rights Reserved
    3:45