ACRYLIC SYSTEM - car

    ACRYLIC SYSTEM: 
    (A) POLYESTER PUTTY ( M-1003 )
    (B) PRIMER SURFACER  ( F-1023 )
    (C) TOP COAT ( D-1189 )
    ( A ) POLYESTER PUTTY ( M-1003 )
    IT IS DESINGED TO LEVEL MAJOR IRPEGUL ARITIES AND IT IS SUITED FOR USE ON LARGER AREAS
    - BASE : UNSATURATED POLYESTER RESIN
    - COLOUR : GREY
    - PROCESSING :
    (1) SURFACE PREPARATION, MUST BE FREE FROM GREASE, RUST, SCALE, AND OTHER IMPURITIES 
    (2) APPLICATION : APPLY UNIFORM COAT WITH A KNIFE AND IN ONE MOTION 
    (3) MIXING RATIO: 3 CAN OF CAPACITY (10 L ) M-1003 : 1 CAN OT CAPACITY ( 1 LT ) HARDENER H-1167 SHORTILY BEFORE APPLICATION 
    (4) POT LIFE: APPROX 30 MIN / 20ْC 
    - FILM THICKNESS : ( 2 – 3 ) MM PER APPLICATION
    - DRYING TIME : ( 30 – 100 ) MIN AT 25ْC 
    - STORAGE : MAY BE STORED FOR 6 MONTHS AT ROOM TEMP 25ْC WHEN KEPT IN ORIGINALLY CLOSED CONTAINERS 

    B- ACRYLIC PRIMER SURFACER (F-1023)
    IS AN ACRYLIC PRIMER , WHICH IS RAPIDLY DRYING WITH GOOD LEVELLING PROPERTIES 
    - BASE : ACRYLIC RESIN 
    - PROCESS VISCOSITY : ( 14 – 16 ) SEC AT 25ْC 
    - THINNER : MPI THINNER / P-851 
    - DRYING TIME : 10 MIN DRY TO TOUCH 12 HR HARD DRY 
    - APPLICATION : BY SPRAY 
    - FLASH POINT : 24ْC 
    - STORAGE : MAY BE STORED FOR 6 MONTHS AT ROOM TEMP 25ْC WHEN KEPT IN ORIGINALLY CLOSED CONTAINERS 

    C- ACRYLIC TOP COAT (D-1189)
    AN ACRYLIC TOP COAT , WHICH IS RAPIDLY DRYING WITH HIGH PERFORMANCE 
    - BASE : ACRYLIC RESIN 
    - COLOUR : ALL UNI COLOURS 
    - THINNER : MPI THINNER / P-851
    - FILM THICKNESS : 30 UM 
    - SPREADING RATE : 10 MIN DRY TO TOUCH 12 HR HARD DRY 
    - APPLICATION METHOD :
    (1) THE SURFACE MUST BE CLEAN, DRY, FREE FROM RUST, OTHER IMPURITIES 
    (2) APPLIED BY SPRAY 
    - STORAGE : MAY BE STORED FOR 6 MONTHS AT ROOM TEMP 25ْC WHEN KEPT IN ORIGINALLY CLOSED CONTAINERS 

     

     


    Copyright © 2015 MPIcoating.com. All Rights Reserved
    3:45