INTERIOR WATER DRINKING TANK PAINT (D-5547) - ind

    INTERIOR WATER DRINKING TANK PAINT (D-5547)

    EPOXY PAINT HAS A HIGH RESISTANT AGAINST MECHANICAL STRESS, WEATHER, WATER, AND CHEMICALS USED FOR INSIDE DRINKING WATER TANK 
    - BASE: EPOXY RESIN 
    - COLOUR: WHITE 
    - THINNER: MPI THINNER / P-851 
    - SPREADING RATE: 7M2 /LT ON METAL SURFACES 4M2 /LT ON CONCRETE SURFACES  
    - FILM THICKNESS : 35 UM 
    - PROCESSING :-
    A- MIXED PAINT (D-5547) WITH HARDENER (H-1457) THE MIXING RATIO IS (1 CAN 10 LITER PAINT) : (1 CAN 4 L HARDENER ) MIXED FOR 20 MIN BEFOR APPLICATION 
    B- POT LIFE: APPROX 12 HR 
    - DRYING TIME 6 HR DRY TO TOUCH AT ROOM TEMP 25°C MAY BE 
    - RECOATING AFTER (8 – 10) HR 
    - APPLICATION METHOD : THE SURFACE MUST BE CLEAN, FREE FROM, DUST, GREASE, EXT 
    C-  APPLIED BY BRUSH, ROLLER, SPRAY
    D-  APPLIED ( 2 – 3 ) LAYERS 
    - STORAGE : MAY BESTORED FOR 12 MONTHS AT ROOM TEMP 25°C WHEN KEPT IN ORIGINALLY CLOSED CONTAINERS 

    NOTE ABOUT APPLICATION METHOD:
    1- MAY BE EXPOSED TO CHEMICAL STRESS AFTER AIR DRYING AND HEAT DRYING ONLY AFTER 7 DAYS THE MATERIAL SHOULD NOT BE PROCESSED AT A TEMPERATURE BELOW 12°C AND A RELATIVE AIR HUMIDITY ABOVE 80 % WHEN USING IN CLOSED CONTAINERS SUFFICIENT AIRING TO BE POVIDED FOR WHEN USING FOR DRINKING WATER TANKS THE FIRST FILLING HASTO BE POURED OUT TO REMOVE POSSIBLE REMNANTS OF SCENTING MATERIALS 

     

     


    Copyright © 2015 MPIcoating.com. All Rights Reserved
    3:45