QUICK DRYING PRIMER FOR INDYSTRIES EQUIPMENTS
B-TOP COAT (D-1245A)
Quick drying primer used for industrial purpose , it gives high resistance to corrosion , weather chemical and mechanical effects .
TYPICAL USE :
Suitable for industrial machines and equipments used for each , crude oil equipments and oil projects , petrochemicals , power projects , electricity , etc .
Short oil alkyd resin in xylene
All uni colours
MPI THINNER / A.
SPREADING RATE :
6 m² /liter .
FILM THICKNESS :
( 30 – 40 ) µm
PRODUCT DATA :
Gloss level gloss ( 80 – 90 )
Density ( 0,95 – 1,25 ) kg/liter depending on clour
Flash point above 21°C
DRYING AND CURING TIME :
Substrate temperature 25°C
Surface ( touch) dry ( 30 – 60 ) /min
Dry to over coat , 8 / hr
Stoving dry : 30 min at 100°C
A-the surface must be clean , free form dust , etc .
B-applied by : spraying .
SURFACE PREPARATION :
To secure lasting adhesion to the subsequent product all surfaces shall be clean , dry and free from any contamination .
SIZE OF CONTAINERS
May be stored for 24 months at room temp. 25°C when kept in originally closed containers.
This product is for professional use only . the applicators and operators shall be trained, experienced and have the capability and equipment to mixture and apply the coating correctly and according to MPI Co. . technical documentation. Applicators and operators shall use appropriate personal protection equipment when using this product.
This guideline is given based on the current knowledge of the product.
Any suggested deviation to suit the site condition shall be forwarded to the responsible MPI Co. representative for approval before commencing the work .
HANDLING/SAFETY PRECAUTIONS :
May cause allergic skin reaction
Avoid contact with eyes , skin or clothing
Avoid breathing vapor, mist or spray
Use with adequate ventilation
Promptly remove wet contaminated clothing and wash before reuse .
Wash after handling .
Store in a cool , dry , area in closed containers .