HIGH TEMPERATURE PAINT UNTIL 600°C (D-7485A)

    HIGH TEMPERATURE PAINT UNTIL 600°C (D-7485A)

     

     

    PRODUCT DISCRIPTION

     

    A high resistant finish for continues temperatures up to 600°C . D-7485 is intended for fittings and pipes conducting . super heated steam off – gas pipes , sheet steel chimneys , and other structural parts made of steel or steel casting   

    TYPICAL USE :

    Used for , crude oil equipments , oil projects , , petrochemicals .power project , electricity. Etc .

     

     

        BASE :

         Silicon risen

     

         COLOUR :                       

         Aluminum  

     

        THINNER:

         MPI THINNER / A.

     

          SPREADING RATE :

          ( 6 - 8 ) m² /liter .

     

         FILM THICKNESS :

         Typical recommended specification range

         20 µm

        

         PRODUCT DATA :

     

         PROPERITY                                         DISCRIPTION

         

    Gloss level                                               semi gloss  

    Density of mixture                                    ( 1,0 – 1,2 ) kg/liter

    Flash point                                               25°C

     

    DRYING AND CURING TIME :

    Substrate temperature                                                                   

     

     
     

     

    30 /min  at 180°C

     

         

     

     

     

         APPLICATION METHOD:

     

    A-the surface must be clean , free form dust , etc .

    B-applied by :  air spraying

      

    SURFACE PREPARATION :

     

    To secure lasting adhesion to the subsequent product all surfaces shall be clean , dry and free from any contamination .

     

          PACKAGING :

                                                                 SIZE OF CONTAINERS

                                                                            (LITRES)

              D-7485                                                       10

        

         STORAGE :

     

          May be stored for 12 months at room temp. 25°C when kept in originally closed containers.

          

    CAUTION :

     

    This product is for professional use only . the applicators and operators shall be trained, experienced and have the capability and equipment to mixture and apply the coating correctly and according to MPI Co. . technical documentation. Applicators and operators shall use appropriate personal protection equipment when using this product.

    This guideline is given  based on the current knowledge of the product.

    Any suggested deviation to suit the site condition shall be forwarded to the responsible MPI Co. representative for approval before commencing the work .

     

    HANDLING/SAFETY PRECAUTIONS :

    May cause allergic skin reaction

    Avoid contact with eyes , skin or clothing

    Avoid breathing vapor, mist or spray

    Use with adequate ventilation

    Promptly remove wet contaminated clothing and wash before reuse .

    Wash after handling .

    Store in a cool , dry , area in closed containers .

     


    Copyright © 2015 MPIcoating.com. All Rights Reserved
    3:45