3- CHLORINATED RUBBER  HIGH BUILT FINISH (D-5566A)

    3- CHLORINATED RUBBER  HIGH BUILT FINISH (D-5566A)

     

     

    PRODUCT DISCRIPTION

     

    This is a chlorinated rubber is a hard aside alkali-resistance protective to water and mineral oil 

     

    TYPICAL USE :

    Suitable for bridges, power stations crude oil equipments , oil projects , oil tanks , petrochemicals .

     

     

        BASE :

         chlorinated rubber risen

     

         COLOUR :                       

         All colours

     

        THINNER:

         MPI THINNER / A.

     

          SPREADING RATE :

          6,6 m² /liter .

     

         FILM THICKNESS :

         Typical recommended specification range

          Dry film thickness                 60 µm per 1 coat

         

         PRODUCT DATA :

     

         PROPERITY                                         DISCRIPTION

         

    Gloss level                                              gloss  80  

    Density                                                    1,5  kg/liter

    Flash point                                               25°C

     

     

    DRYING AND CURING TIME :

    Substrate temperature                                                 25°C                 

     

     
     

     

    Surface ( touch) dry                                                     60 /min              

    Dry to over coat ,                                             spray 12/h  brush & roller  24 / hr

     

     

     

         APPLICATION METHOD:

     

    A-the surface must be clean , free form dust , etc .

    B-applied by :

    brush , roller, spray do not apply paint at temp . below 12°C at relative humidity above 80%

     

                

     

    SURFACE PREPARATION :

     

    To secure lasting adhesion to the subsequent product all surfaces shall be clean , dry and free from any contamination .

     

          PACKAGING :

                                                                 SIZE OF CONTAINERS

                                                                            (LITRES)

         D-5566                                                           10

     

         STORAGE :

     

          May be stored for 12 months at room temp. 25°C when kept in originally closed containers.

          

    CAUTION :

     

    This product is for professional use only . the applicators and operators shall be trained, experienced and have the capability and equipment to mixture and apply the coating correctly and according to MPI Co. . technical documentation. Applicators and operators shall use appropriate personal protection equipment when using this product.

    This guideline is given  based on the current knowledge of the product.

    Any suggested deviation to suit the site condition shall be forwarded to the responsible MPI Co. representative for approval before commencing the work .

     

    HANDLING/SAFETY PRECAUTIONS :

    May cause allergic skin reaction

    Avoid contact with eyes , skin or clothing

    Avoid breathing vapor, mist or spray

    Use with adequate ventilation

    Promptly remove wet contaminated clothing and wash before reuse .

    Wash after handling .

    Store in a cool , dry , area in closed containers .

     


    Copyright © 2015 MPIcoating.com. All Rights Reserved
    3:45