TOW PACK EPOXY FINISH (D-5542A)
This is a two component epoxy based product , has a high resistant against mechanical stress , weather , water and chemicals .
TYPICAL USE :
Suitable for tanks , bridges, power stations crude oil equipments , oil projects , oil tanks , petrochemicals .
MPI THINNER / A.
SPREADING RATE :
7 m² /liter .
FILM THICKNESS :
Typical recommended specification range
Dry film thickness 50 µm per 1 coat
Wet film thickness 70 µm
PRODUCT DATA :
Gloss level gloss ( 90 – 100 )
Density (1.3 - 1,4 ) kg/liter
Flash point 38°C
DRYING AND CURING TIME :
Substrate temperature 25°C
Surface ( touch) dry ( 4 – 5 ) /hr
Dry to over coat , ( 8 – 10 )/ hr
PRODUCT MIXING RATIO (BY VOLUME)
D-5542 A 10/ liter
Hardener (H-5530) 10 / liter
And mixed well for 20 min.
INDUCTING TIME AND POT LIFE
PAINT TEMPERATURE 25°C
Pot life approx.8/hr
A-the surface must be clean , free form dust , etc .
B-applied by :
brush , roller, spray do not apply paint at temp . below 12°C at relative humidity above 80%
SURFACE PREPARATION :
To secure lasting adhesion to the subsequent product all surfaces shall be clean , dry and free from any contamination .
SIZE OF CONTAINERS
D-5542 AG 10
May be stored for 24 months at room temp. 25°C when kept in originally closed containers.
This product is for professional use only . the applicators and operators shall be trained, experienced and have the capability and equipment to mixture and apply the coating correctly and according to MPI Co. . technical documentation. Applicators and operators shall use appropriate personal protection equipment when using this product.
This guideline is given based on the current knowledge of the product.
Any suggested deviation to suit the site condition shall be forwarded to the responsible MPI Co. representative for approval before commencing the work .
HANDLING/SAFETY PRECAUTIONS :
May cause allergic skin reaction
Avoid contact with eyes , skin or clothing
Avoid breathing vapor, mist or spray
Use with adequate ventilation
Promptly remove wet contaminated clothing and wash before reuse .
Wash after handling .
Store in a cool , dry , area in closed containers .