INTERIOR WATER DRINKING TANK PAINT (D-5547A)

    INTERIOR WATER DRINKING TANK PAINT (D-5547A)

     

     

    PRODUCT DISCRIPTION

     

    This is a two component  epoxy based product , has a high resistant against mechanical stress , weather , water and chemicals .

     

    TYPICAL USE :

    Suitable for water industry used for inside drinking water tank , bridges, power stations crude oil equipments , oil projects , oil tanks , petrochemicals .

     

     

        BASE :

         Epoxy risen

     

         COLOUR :                       

         White  

     

        THINNER:

         MPI THINNER / A.

     

          SPREADING RATE :

          7 m² /liter .

     

         FILM THICKNESS :

         Typical recommended specification range

          Dry film thickness                  35 µm per 1 coat

          Wet film thickness                 60 µm

     

         PRODUCT DATA :

     

         PROPERITY                                         DISCRIPTION

         

    Gloss level                                              gloss ( 90 – 100 )   

    Density                                                    1.3± 0.05 kg/l

     

     

    DRYING AND CURING TIME :

    Substrate temperature                                                 25°C                  

     

     
     

     

    Surface ( touch) dry                                                     6 /hr              

    Dry to over coat ,                                                        ( 8 – 10 )/ hr

     

     

         PRODUCT MIXING RATIO (BY VOLUME)

    D-5547                                              10/ liter  

    Hardener  (H-1457)                           4 / liter

    And mixed well for 20 min.

     

     

     

    INDUCTING TIME AND POT LIFE

     

    PAINT TEMPERATURE                                                                     25°C

     

     

    Pot life                                                                                                 approx.12/hr

     

         APPLICATION METHOD:

     

    A-the surface must be clean , free form dust , etc .

    B-applied by :

    brush , roller, spray do not apply paint at temp . below 12°C at relative humidity above 80%

    C-applied ( 2 – 3 ) layers

     

                

     

    SURFACE PREPARATION :

     

    To secure lasting adhesion to the subsequent product all surfaces shall be clean , dry and free from any contamination .

     

     

          PACKAGING :

                                                                 SIZE OF CONTAINERS

                                                                            (LITRES)

             D-5547                                                   10

        H-1457                                                    4

     

     

         STORAGE :

     

          May be stored for 24 months at room temp. 25°C when kept in originally closed containers.

          

     

     

     

    CAUTION :

     

    This product is for professional use only . the applicators and operators shall be trained, experienced and have the capability and equipment to mixture and apply the coating correctly and according to MPI Co. . technical documentation. Applicators and operators shall use appropriate personal protection equipment when using this product.

    This guideline is given  based on the current knowledge of the product.

    Any suggested deviation to suit the site condition shall be forwarded to the responsible MPI Co. representative for approval before commencing the work .

     

    HANDLING/SAFETY PRECAUTIONS :

    May cause allergic skin reaction

    Avoid contact with eyes , skin or clothing

    Avoid breathing vapor, mist or spray

    Use with adequate ventilation

    Promptly remove wet contaminated clothing and wash before reuse .

    Wash after handling .

    Store in a cool , dry , area in closed containers .

     


    Copyright © 2015 MPIcoating.com. All Rights Reserved
    3:45